At Lincolnshire Roof Windows, we know how much our customers across Scunthorpe, Grimsby, Louth, and Barton-upon-Humber love the natural light and ventilation that a VELUX window brings. But to keep your VELUX in top condition, a bit of simple cleaning and maintenance goes a long way.
Here’s our straightforward homeowner’s guide to keeping your VELUX window looking and working like new.
🧽 1. How to Clean the Window Glass
Inside pane:
- Clean with a soft cloth or non-abrasive sponge and mild soapy water.
- Avoid harsh cleaning products or anything that might scratch the glass.
- Wipe dry with a soft cloth for a streak-free finish.
Outside pane (on centre-pivot windows):
- Rotate the window 180° until it locks in the cleaning position.
- Clean as above, then gently rotate it back when finished.
✅ Tip: Do this on a dry, calm day to avoid rain or wind while the window is open.
🪟 2. How to Clean the Frame and Air Filter
Frame:
- Wipe the timber or uPVC frame with a damp cloth and mild detergent.
- For timber windows, avoid soaking the frame — just a damp wipe is enough.
Ventilation filter:
- Open the window and locate the filter inside the ventilation flap.
- Slide it out, rinse under warm water, allow it to dry, then slide it back in.
✅ Tip: Clean the filter every 6 months for optimal airflow.
🛠️ 3. Regular Maintenance Checks
Check these areas once or twice a year:
- Seals and gaskets: Look for signs of wear or cracking around the window frame.
- Hinges and opening mechanisms: A small dab of silicone spray can keep things running smoothly.
- Rain sensor (on electric/solar models): Wipe clean with a soft cloth to ensure automatic closing works properly.
☔ 4. What If Condensation Appears?
Condensation isn’t a window fault — it’s usually a sign of poor ventilation or high humidity. To reduce it:
- Open the VELUX regularly to let fresh air in.
- Use extractor fans in kitchens and bathrooms.
- Consider fitting a VELUX blind with moisture-resistant fabric.
🔧 5. When to Repaint or Refinish Timber Windows
If you have a timber-framed VELUX, it may need re-lacquering every few years:
- Lightly sand the surface.
- Apply a water-based lacquer recommended by VELUX.
- Allow to dry fully before closing the window.
✅ Tip: Always check the care instructions specific to your model.
🔄 6. Time to Replace the Glazing?
Over time, older VELUX windows may develop misting or lose insulation. We can upgrade your glazing or replace the entire unit with a newer, more efficient model — often without disturbing the interior.
👷 Need Professional Help?
If your window isn’t opening properly, the seal is damaged, or you’re unsure what to do — we’re here for you.
At Lincolnshire Roof Windows, we offer:
- VELUX servicing & repairs
- Replacement glazing
- Professional advice on upgrades
Keep Your VELUX in Top Condition – With Our Help!
Looking after your VELUX doesn’t have to be a chore. A little routine maintenance keeps your window working beautifully for years to come.
📞 Call Lincolnshire Roof Windows today for advice, servicing, or to book a visit anywhere in Scunthorpe, Grimsby, Louth, or Barton-upon-Humber.
